Image of SLM's logo

Home Page
Company Profile
Products
Email us
Contact Info
Heading For PM1/S/P Page

PM1A/S/P

  • Instrument style case with radii on all external corners.
  • Two similar halves fixed together with four self tapping screws (included).
  • Case sides located by ‘tongue & groove’.
  • ‘Drop in’ end plates provide a versatile design.
  • Top & bottom faces have ‘cooling slots’ in the centre; slots are 1.2mm wide and 32mm long. They cover a total area of 70.0mm x 52.0mm.
  • Cost effective tooling available for your own end panels.
  • Plastic end panels can be substituted for metal.


    • Sizes

    170.0mm x 122.0mm x 52.0mm inside.

    Screw pillars intrude 6mm x 7mm into box.

    Wall section 3.2mm.
    Panel thickness 1.6mm.
Image of SLM's PM1A/S/P Enclosure