Home Page
Company Profile
Products
Order Form
Email us
Contact Info
RX1008S/P
- Instrument style case with radii on all external corners.
- Two similar halves fixed together with two self tapping screws (included).
- Case sides located by ‘tongue & groove’.
- 4 bosses spaced at 70.0mm x 35.0mm are provided in both top and bottom faces for PCB fixing.
- Cost affective tooling available for your own end panels.
- Plastic end panels can be substituted for metal if required.
Sizes
94.7mm x 68.8mm x 45.0mm inside.
Screw pillars intrude 6mm x 7mm into box.
Wall section 3.2mm
Panel thickness 1.6mm.