• The RX2KL boxes are very similar to our extremely popular RX2000 range, this series of boxes share the same width and depth dimensions but are 50% longer



• All the boxes are similar in design and appearance having radii on all external corners.



• The screw pillars intrude into the box by 3mm x 3mm in each corner.

• The boxes are slightly tapered on the outside to allow a textured finish with the minimum of ‘drag marks’ however, the boxes are parallel on the inside, the taper being lost in the wall section.



• All boxes have a wall section of 1.7mm.



• Each box is approx. 15% bigger/smaller than the next one in the series.



• Lid fixing is by No2 self tapping screws (included).

**  Approx 1mm of this depth is included in the lid.